Loop Attachment & Detachment; Attach The Loops (5 Steps); Detach The Loops (2 Steps); Allowed Combinations - arjo Bariatric Slings Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44

Allowed Combinations

WARNING
To avoid injury, always follow the allowed combinations listed in this IFU. No other
combinations are allowed.

Safe Working Load (SWL)

Always follow the lowest SWL of the total system. E.g. Tenor lift/spreader bar has a SWL of 320 kg (705 lbs)
and the MAA8000 has a SWL of 454 kg (1000 lbs). This means that the Tenor lift/spreader bar has the lowest
SWL. The patient is not allowed to weigh more than the lowest SWL.
Lift
EN
SWL
Spreader Bar
Sling
SWL
MAA8000
454 kg (1000 lbs)
MAA8000A
454 kg (1000 lbs)
MAA8010
454 kg (1000 lbs)
MAA8020
454 kg (1000 lbs)
MAA8030
454 kg (1000 lbs)
Loop Attachment & Detachment
4 point spreader bar: First attach the shoulder
loops in the front hooks. Then attach the leg loops in
the back hooks
WARNING
Do not cross the shoulder straps.

Attach the Loops (5 Steps)

WARNING
Use the same loop length (loop colour) for
the shoulder straps and the same length
(loop colour) for the leg straps.
1. Place the loop over the spring loaded latch (A).
(See Fig. 3 )
2. Pull the loop down to force the latch to open.
3. Make sure that the spring loaded latch closes
completely with the loop inside. (See Fig. 3 )
4. Make sure that the latch is moving freely.
5. Make sure loops and straps are not twisted.
Fig. 3
Tenor
320 kg (705 lbs)
4 point loop bar
Size
Size
M, L, XL, XXL
M, L, XL, XXL
M, L
M, L
M, L, XL, XXL
M, L, XL, XXL
M, L, XL, XXL
M, L, XL, XXL
M, L, XL, XXL
M, L, XL, XXL
NOTE
The loops lengths on the straps are used to
adjust the patient's position and comfort.
• Loops closer to the shoulders;
more forward position
• Loops further away from the shoulders;
more reclined position
• Loops closer to the legs;
raised legs/bottom
• Loops further away from legs;
lowered legs/bottom

Detach the Loops (2 steps)

Make sure that the weight of the patient is taken up by
the receiving surface before removing the loop.
Method 1
1. Press the spring loaded latch open.
2. Remove the loop.
Method 2
1. Pull one side of the loop over the hook and spring
loaded latch.(See Fig. 4 )
2. Pull down the loop. (See Fig. 5)
Fig. 4
A
6
Maxi Sky 1000
454 kg (1000 lbs)
4 point bariatric
spreader bar
Size
M, L, XL, XXL
-
M, L, XL, XXL
M, L, XL, XXL
-
Fig. 5
Maxi Sky 2 Plus
454 kg (1000 lbs)
spreader bar

Publicité

Table des Matières
loading

Table des Matières