Setting The Exposure Correction (Ev) In Ttl Mode On The Master Flash Unit; Partial Light Output In M-Mode Settings On The Master Flash Unit - Metz mecablitz 52 AF-1 Nikon digital Mode D'emploi

10.1.2.1 Setting the exposure correction
(EV) in TTL mode on the master
flash unit
REMOTE TTL
• Press the sensor button on the touch
MASTER
display for the master mode as many
4 —
A
times as it takes for the master selection to
4 —
B
4 —
C appear.
INFO AIBIC
MASTER
• Press the
display.
MODE
EV
+ 2 / 3
• Press the
touch display and set the desired exposure
+ 1
correction (e.g. +1).
+ 1 1 / 3
• Press the sensor button for the desired
exposure correction value
REMOTE TTL
MASTER +1
The setting is adopted immediately.
4 —
A
4 —
B
4 —
C
INFO AIBIC
EV
sensor button on the touch
sensor buttons on the
+1
.
10.1.2.2 Partial light output in M-mode
settings on the master flash unit
REMOTE
M
MASTER
1/1
Set the mode to
4 —
A
• Press the
4 —
B
display as many times as it takes for the
4 —
C
master selection to appear.
INFO AIBIC
• Press the
display.
MASTER
MODE
• Press the
touch display to set the desired partial light
P
output.
1/8 -2 /
3
1/16
• Press the sensor button of the selected
partial light output
1/16 -1 /
3
display.
REMOTE M
MASTER 1/16
4 —
A
4 —
B
4 —
C
The setting is adopted automatically.
INFO AIBIC
M
as described in 10.1.2.
M
sensor button on the touch
P
sensor button on the touch
sensor buttons on the
1/16
on the touch
163
k