Video Setting" Submenu; Language" Submenu; Reset" Submenu; Save-Exit" Submenu - Sygonix SY-MV3215 SY-3561086 Notice D'emploi

d) "VIDEO SETTING" submenu
All functions that are used to adjust the picture adjustment are gathered here.
"CONTRAST": Contrast
"SHARPNESS": Image sharpness
"COLOR GAIN": Colour saturation
"DNR": Noise suppression
"TRANSFER MODE": Select video output signal of the surveillance camera ("AHD" = "Analogue
High Definition" = HD video signal, "CVBS" = standard analogue video signal, "CVI" = "Compos-
ite Video Interface", "TVI" = "Transport Video Interface")
In "CVBS" mode the surveillance camera provides a standard analogue video signal,
which can be displayed on almost every traditional surveillance monitor and can be
recorded on appropriate DVRs.
In the "AHD", "CVI" and "TVI" operating modes, the surveillance camera provides
a high-resolution video signal that gives a much better image quality than "CVBS".
However, you need a special DVR to be able to watch and record this high-resolution
video signal.
"FORMAT": Switching between PAL and NTSC
"DWDR": Dynamic range function; brightening of dark areas in difficult ambient conditions
"RETURN" = exit submenu and return to the previous menu
e) "LANGUAGE" submenu
This is where you can set the language for the OSD menu.
f) "RESET" submenu
To reset all settings to the factory default settings, select this submenu and then confirm your
selection.
g) "SAVE-EXIT" submenu
Once you have adjusted the OSD menu settings, you can save them here. The OSD menu is
then automatically exited.
24