14. Description of the Setup Menu of the Surveillance
Cameras
a) Submenu "EXPOSURE"
Set the lighting here.
"BLC"
"G AE"
b) Submenu "SHUTTER MODE"
Preferably leave the setting at "AUTO" so that the exposure time can be selected automatically depending on the
ambience light.
"AUTO"
"MANUAL"
c) Submenu "AGC"
"AGC"
"INTENSITY"
d) Submenu "AWB"
Here, you can set the automatic white balance. Three different settings ("ATW1", "ATW2" and "ATW3") are possible;
the ATW function adjusts the colour continually and automatically according to the changes of the colour temperature.
Backlight compensation: The intensity can be set in 3 steps ("LOW", "MIDDLE", "HIGH").
Automatic exposure: The brightness can be set in 3 steps ("LOW", "MIDDLE", "HIGH").
Automatic setting of the exposure time
Manual setting of the exposure time (1/50.....1/100000 s for PAL, 1/60....1/100000 s for NTSC)
Switch the automatic amplification control "ON" or "OFF" here.
Here, you can set the intensity at which the amplification control is to work ("LOW", "MIDDLE",
"HIGH").
35