Video Setting" Submenu; Language" Submenu - Sygonix LHE GH4R 1080P Notice D'emploi

"B/W": Black/white setting
With this setting, the IR filter stays deactivated during the day. This can result in a washed-out image.
"RETURN" = exit submenu and return to the previous menu
d) "VIDEO SETTING" submenu
All functions that are used to adjust the picture adjustment are gathered here.
"CONTRAST": Contrast
"SHARPNESS": Image sharpness
"COLOR GAIN": Colour saturation
"DNR": Noise suppression
"TRANSFER MODE": Select video output signal of the surveillance camera ("AHD" = "Analogue High Definition" =
HD video signal, "CVBS" = standard analogue video signal, "CVI" = "Composite Video Interface", "TVI" = "Transport
Video Interface")
In "CVBS" mode the surveillance camera provides a standard analogue video signal, which can be displayed
on almost every traditional surveillance monitor and can be recorded on appropriate DVRs.
In the "AHD", "CVI" and "TVI" operating modes, the surveillance camera provides a high-resolution video
signal that gives a much better image quality than "CVBS". However, you need a special DVR to be able to
watch and record this high-resolution video signal.
The default setting of the surveillance camera is "AHD".
"FORMAT": Switching between PAL and NTSC
"DWDR": Dynamic range function; brightening of dark areas in difficult ambient conditions
"RETURN" = exit submenu and return to the previous menu
e) "LANGUAGE" submenu
This is where you can set the language for the OSD menu.
25