Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10
Control panel
The control panel is divided into four areas.
•
Speed
•
Rotation display
•
Time
•
Keys
10.1
Speed area
The speed area contains the speed display which indicates the preselected speed or the ACTUAL speed during
operation.
The speed can be preselected or changed during operation with the
display flashes in seconds until the lid is opened or a key is activated.
10.2
Rotation area
The rotation area contains the rotation display, which illuminates and rotates anti-clockwise whilst the rotor is turning.
When the
symbols lights up, the rotor is stationary and the lid can be opened.
When the lid is unlocked, the
10.3
Time area
This area contains the running time display and the
preselected or changed during operation.
When stationary, the preselected switch-on time is displayed, as well as the remaining run time during operation. The
decimal point flashes each second during operation.
At the end of operation, the display flashes each second until the lid is opened or a key is activated.
10.4
Key area
Start key
To start a run with the preselected parameters.
START
.
Stop key
The STOP key allows a centrifuging run to be stopped at any time.
STOP
.
Pulse key
Brief centrifuging whilst the key is pressed down.
The run time is displayed in seconds in the run time display.
After 60 seconds, the run time is displayed in minutes.
symbol lights up.
and
and
arrow keys. At the end of operation, the
arrows, with which the switch-on time can be
EN
23/58
Publicité
Chapitres
Table des Matières
