Operating And Display Elements; Displayed Symbols; Control Panel Keys - Hettich MIKRO 185 Mode D'emploi

EN
15

Operating and display elements

>RCF< RPM
RPM/RCF
15.1

Displayed symbols

Lid unlocked.
Lid locked.
Rotation display. The rotation display lights up, rotating counterclockwise, as long as the rotor is turning.
15.2

Control panel keys

 Input the speed directly.
RPM/RCF
If the key is kept pressed, the value changes with increasing speed.
 Input the runtime directly.
t
Adjustable in steps of 1 second up to a minute, and in steps of 1 minute starting from 1 minute.
 Input the centrifuging parameters.
If the key is kept pressed, the value changes with increasing speed.
 Selection key for activating the individual parameters.
SELECT
Every time the key is pressed, the next parameter is activated.
 Call up the "MACHINE MENU" (keep the key pressed for 8 seconds).
 In the "Machine Menu", select the menus "
 Scroll forward in the menus.
 Switching between the RPM display (RPM) and RCF display ( RCF ).
RCF
RCF values are displayed in parentheses
RPM Speed
RCF : Relative centrifugal acceleration
 Start the centrifugation run.
START
 Short-term centrifugation.
PULSE
Centrifugation is run as long as the key is kept pressed.
 Call up the menus "
 Finish the centrifugation run.
STOP
OPEN
The rotor runs down with a pre-selected brake stage.
Pressing the key twice triggers the Emergency Stop.
 Unlock the lid.
54/146
t/min:s
START
RCF
PULSE
t
STOP
SELECT
OPEN
Info", " Settings" and "
Rev. 05 / 05.2020
Info", " Settings" and "
.
Time & Cycles".
Time & Cycles".
AB1203DEENFRIT