View Of The Control Panel - Gtec SATURN Série Manuel D'installation

V C
IEW OF THE ONTROL
Mains operation LED
 On steady: mains operation with good bypass line and synchronised inverter
 Flashing: mains operation with bad or disabled bypass line and/or non-synchronised inverter
 Flashing in standby: programmed restart function active and mains present
Battery operation LED
 On steady: battery operation
 Flashing: battery operation with early low battery or imminent shutdown warning
 Flashing in standby: programmed restart function active and mains absent
Load on bypass LED
 On steady: load powered from bypass line
Standby/alarm LED
 On steady: replace batteries
 Flashing: batteries overloaded alarm
Replace batteries LED
 On steady: replace batteries
 Flashing: batteries overloaded alarm
ECO mode LED
 On steady: ECO mode configuration active
Graphic display
F1, F2, F3, F4
=
P
ANEL
FUNCTION KEYS. Each key's task can be found on the lower part of the display and varies
according to menu.
- 64 -