External Temperature Probe; Remote Panel ( Optional ) - Gtec SATURN Série Manuel D'installation

E T
XTERNAL EMPERATURE
This NON ISOLATED input may be used to measure the temperature inside a remote Battery Box.
The special kit provided by the manufacturers must be used: any methods not conforming to specifications
may cause faults or breakdowns in the equipment.
To install, connect the cable included in the special kit to the "EXT BATTERY TEMP PROBE" connector (see "View of the
UPS Connections" ref. 3).
After installation, enable the outdoor temperature measuring function using the configuration software.
R
EMOTE PANEL
The remote panel enables the remote monitoring of the UPS and gives a real time detailed summary of the machine status.
The device ensures that the operator can control the electrical values of the mains power, outputs, batteries, etc. and
locate any alarm conditions.
For further information regarding the connection and use of this device, please refer to its apposite manual.
P
ROBE
( )
OPTIONAL
- 85 -