Gtec SATURN Série Manuel D'installation page 71

WARNING: IN ORDER TO AVOID DAMAGE TO PERSONS AND/OR TO THE MACHINES, PLEASE
FOLLOW SCRUPULOUSLY THE INDICATIONS GIVEN BELOW.
SOME OF THE FOLLOWING OPERATIONS REQUIRE TWO PEOPLE.
 Cut the straps and slide the cardboard box
off the unit pulling upwards. Remove the
packaging.
 Remove the box containing the accessories.
NOTE: The box of accessories may be
inside the packaging or behind the UPS
door.
 Once removed, the two brackets can be used as ramps. Fasten the ramps to the pallet using the screws A and
making sure to align them with the wheels of the unit.
 Turn the feet as far as they will go in order to increase the distance between the unit and the pallet.
 Make sure that the door is properly closed.
 WARNING: to unload the UPS from the pallet, we recommend that you push it down the ramps from behind,
taking every precaution and accompanying the unit along the ramps to the floor. In view of the weight of the
machine, this operation should be carried out by two people.
NOTE: We advise you to keep all the parts of the packaging for future use.
 Remove the two brackets securing the UPS to the pallet by
loosening screws A and B.
- 71 -