Changing Procedure Of The Various Settings - JUKI LB-6 Manuel D'utilisation

5. Changing procedure of the various settings

Refer to " # -4. Various settings of the chain-off thread rolling-in sewing " , and check the change mode
of the item to be changed.
Changing procedure of the respective modes is as described below.
(1) Changing procedure under the users' mode
6 5
Setting NO.
1
2
1) Turn OFF the power.
Pressing switch 4, turn ON the power.
2)
4
Indication 5, 6 will be shown on the display. (If
3)
the indication fails to change, re-perform the pro-
cedures 1) and 2).
4) When you want to advance the setting No., press
switch 2 to advance the setting No.
When you want to return the setting No., press
switch 1 to return the setting No.
When switch 1 (switch 2 ) is held press-
ing, the setting No. will return (will ad-
vance) continuously. When the setting No.
is advanced (returned), the contents
which are before by one (after by one) will
be determined. So, be careful when chang-
ing the contents (up/down switch is
touched).
21