JUKI LB-6 Manuel D'utilisation page 56

(2) Selecting procedure of the machine head type
Do not perform switch operations other than those described in the following explanations.
Be sure to re-turn the power switch ON after one second or more has passed. If the power is
turned ON immediately after turning it OFF, the sewing machine may not work normally. In
this case, turn ON the power again.
2
1 Switch for entering specified value changed
and updating setting No. in DOWN direction
2 Switch for entering specified value changed
and updating setting No. in UP direction
5
5
Specified value
Specified No.
1 2
3 Down switch (DOWN)
4 Up switch (UP)
5 Mode changeover switch
How to change over to the function setting mode
1) Turn OFF the power to the unit.
switch 5, turn ON the power to
2) Pressing
the unit.
3) The display on the screen is as shown in the fig-
ure. (If the indication fails to change, re-perform
the procedures 1) and 2).
If you have already set other items, the
last number and the data you have set are
displayed.
3 4 5