JUKI LB-6 Manuel D'utilisation page 76

1 2
1 2
22
3 4
Example) Change of the number of revolution of soft start
Press switch 1 or 2 to call No. 37.
Press switch 3 or 4 to change the num-
ber of revolution.
5) When the change has been completed, press
switch 1 or 2 to specify the changed value.
1. When turning OFF the power before
performing this work, the contents
which have been changed are not up-
dated.
2. Press switch 1 , and screen display will
change to the contents of the setting
No. which is before by one.
3. Press switch 2 , and screen display will
change to the contents of next setting
No. After completing the operation,
turn OFF the power and turn ON the
power again to return to the normal op-
eration.
After completing the operation, turn OFF the power
and turn ON the power again to return to the normal.