JUKI LB-6 Manuel D'utilisation page 66

(2) Changing procedure under the normal mode
2
1
12
3
4
1) Turn ON the power.
Symbols of " - " are displayed under the displays
of A, B, C, and D.
2) Calling of the setting mode
switch 2.
Press
The display is changed over as shown in the fig-
ure, and changed over to the display of the num-
ber of stitches of each process (display C). Fur-
switch 2 and the display is
ther press
changed over to U1 1 / U1 2 / U1 3.
The sewing machine does not operate at
the time of this display.
switch 3 or
3) Press
the set value between the range of 0 and 100.
4) Determination of the contents
switch 1. The changed contents can
Press
be determined by the switch operation, and the
displayreturns to the normal display.
When the power is turned OFF on the way, the
contents cannot be updated. When the display
returns to the normal display, the pedal opera-
tion or the like becomes effective.
switch 4 to change