Setting Of The Chain-Off Thread Rolling-In Function - JUKI LB-6 Manuel D'utilisation

2. Setting of the chain-off thread rolling-in function

1
2
4
Changeover to the function setting mode
[Changeover to the service mode]
1)
2)
3)
4)
5
5)
Turn OFF the power.
switch 5, turn ON the power.
Pressing
The screen is displayed. Continue pressing
switch 5 for three seconds.
When the second buzzer beeps, the changeover
to the service mode is completed.
The display of the screen is as shown in the figure.
(Same as the users' mode)
If you have already set other items, the
last number and the data you have set are
displayed.
Call the chain-off thread rolling-in function.
switch 1 or
Press
display as shown in the figure (No. 141)
switch 2 to call the