Setting Of The Auto-Lifter Function - JUKI LB-6 Manuel D'utilisation

3. Setting of the auto-lifter function

3
4
1) Turn OFF the power.
switch 3, turn ON the power.
2) Pressing
3) "FL on" is displayed. When "FL oFF" is displayed,
carry out steps 1) and 2) again.
4) The display can be changed over between "FL
on S" and "FL on A" by
on A".
5) When the display of the screen becomes " FL on
A " , the auto-lifter function becomes effective.
Turn OFF the power in the state.
switch 4. Select "FL
7