The system must be equipped with
an earth connection and a differential
switch in compliance with the laws in
force.
The flue gas evacuation duct must
be equipped with its own earth
connection.
7.7.1 Installation of the control panel
The control panel of the appliance can be applied
to the wall.
Do not install the recessed box on hot
areas of the hood.
Arrange the passage of the cable be-
tween the panel and the electronic
board, so that it is not damaged by the
high temperature during normal oper-
ation of the appliance.
Connect the cable between the terminals of the
electronic board and the control panel before
004778890 - 12/11/2021
ITALIANO
closing the boxes.
7.7.2 Connection to the room thermostat
The appliance can be connected to an external
thermostat or chronothermostat that switches it
on and off.
For the connection, refer to the wiring diagram in
the technical specifications.
Fig. 42
Fig. 43
ENGLISH
FRANÇAIS
71