• Remove the ash in the area indicated in (Fig.
52).
9.3 Ordinary maintenance
• Check the condition and tightness of
all the seals.
• Check the condition of all internal
components and make sure they are
clean.
• Make sure the flue gas outlet con-
nection is sealed and clean.
• Remove any deposits of pellet resi-
dues in the hopper.
9.3.1 Appliance maintenance
This should be carried out once a year or whenev-
er necessary, following the steps indicated below:
• Release the door by using the cold handle pro-
vided.
• Open the door with the handle.
76
• Remove the burn pot.
Fig. 52
• Grip the bottom wall by the handles.
• Remove the bottom wall by pushing it upwards
and then, turning the lower part outwards.
Fig. 53
Fig. 54
004778890 - 12/11/2021