• Remove the screws (A) and extract the side
panels.
• Vacuum the residual ash.
004778890 - 12/11/2021
A
Fig. 55
Fig. 56
ITALIANO
9.3.2 Flue gas T-pipe maintenance
The flue gas T-pipe must be cleaned by removing
the appliance from its seat and vacuuming the
residues contained inside the T-pipe with an ash
vacuum cleaner.
• Open the door.
• Turn the pin anticlockwise using the key pro-
vided and release the catch
• Pull the appliance out until it reaches the end
of the guides.
• Use an ash vacuum cleaner to remove debris
inside the T-pipe.
• Check that the door locking mechanism is
working correctly and lubricate it.
ENGLISH
FRANÇAIS
Fig. 57
Fig. 58
77