Palazzetti A78 Manuel D'installation, D'utilisation Et De Maintenance page 78

9.3.3 Smoke collector maintenance
Once the operation at "9.2.3 Cleaning the smoke
collector " on page 75, regularly carried out by
1
the user, is correctly done it's necessary to clean
the smoke collector.
• Remove the cap and its gasket.
• Clean the entire area indicated in (Fig. 60).
78
9.3.4 Auger maintenance
In case the feed pipe that takes the pellets from
the hopper to the combustion chamber gets
clogged, proceed as follows:
• Remove the inspection plate catch (A).
• Remove the inspection plate (B).
Fig. 59
2
• Remove the pellet residues inside the feed pipe
using a screwdriver.
B
• Proceed in reverse order to paragraph "9.3.2
Flue gas T-pipe maintenance" on page 77
A
to reset the appliance.
Fig. 60
B
A
004778890 - 12/11/2021
Fig. 61
Fig. 62