socomec DIRIS Ap Notice D'utilisation page 45

13 PROGRAMMING N° 2 PULSE OUTPUT TYPE (OUt 2 TYPE)
NB: The energy type default setting is reactive energy (ER). If you want this value, press
pulse output value programming (OUt 2 VAL). If not, proceed as follows:
KEYS INSTRUCTION
Press once
Press once
Press once
Press once
14 PROGRAMMING N° 2 PULSE OUTPUT VALUE (OUt 2 VAL)
NB: The default setting is 10 (VAL 10). If you want this value press
gramming (OUt 2 DUR). If not, proceed as follows:
KEYS INSTRUCTION
Press once
Press once
Press once
SOCOMEC - Ref. : 875 510A
DISPLAY COMMENT
to display flashing ER
Press again for:
EA - , ER - , EA and ER
ou
Press again for:
ER - , EA - , ES and ER
Confirm time.
Press on to pass
programming (VAL)
. You will pass to N° 2 pulse output duration pro-
DISPLAY COMMENT
to display flashing
10 kWh, kvarh, kVAh
Press again for:
1000 ; 10000; 0,1; 1 and
10 kWh/kvarh/kVAh
ou
Press again for:
0,1;10000;1000;100 and 10 kWh,
kvarh, kVAh
(OPTION)
. You will pass to N° 2
to value
(OPTION)
45