socomec DIRIS Ap Notice D'utilisation page 44

Press once
Press once
Press once
12 PROGRAMMING N°1 PULSE OUTPUT DURATION (OUt 1 DUR)
NB: The duration default setting is 100 ms (DUR 100). If you want this value, press
output programming line (OUt 2). If not, proceed as follows:
KEYS INSTRUCTION
Press once
Press once
Press once
Press once
44
Press again for:
1000; 10000; 0,1; 1 and
10 kWh/kvarh / kVAh
ou
Press again for:
0,1; 10000; 1000; 100 and
10 kWh/kvarh / kVAh
Confirm value.
Press on
programming
DISPLAY COMMENT
to display flashing the first digit
Press again for:
300, 400, 500, 600, 700, 800 and
900 ms
ou
Press again for:
800, 700, 600, 500, 400, 300 and
200 ms
Confirm time.
Press on
output type programming (OUt 2)
to pass to pulse duration
(OPTION)
. You will pass to the N° 2 pulse
to pass to N°2 pulse
SOCOMEC - Ref. : 875 510A