Wiring A Mechanical Contact Version - Burkert 1062 Manuel D'utilisation

into the notches provided for this purpose in the bottom of the
housing, as shown in „Fig. 6" below:
Fig. 6: Final position of the cable
28
english
Type 1062
Installationandwiring
8.2.1

Wiring a mechanical contact version

note
on a mechanical contact version, the used contact is not
voltage free.
• Do not connect the unused contact in order to obviate any danger
of malfunction.
Green light (open
valve detection)
Orange light (volt-
age present)
1062
Fig. 7: Wiring of the contact when normally open (NO) on a
mechanical contact version, valve open detection
Use a power supply that matches the data shown on the name plate of the
1)
1062
Fuse suitable for
the max. load
-
+
NC NO
+
-
Power supply
Load + -
8 A max.
1)