Burkert 1062 Manuel D'utilisation page 15

Technicaldata
Version with inductive
2-wire switch (per
switch)
• Power supply • 10-30 V DC
• ≤ 2 mA
• Power consumption
• ≤ 100 mA
• Allowable load
• Type of output • contact normally open or normally
closed
Version with inductive
3-wire switch (per
switch)
• Power supply • 10-30 V DC
• ≤ 25 mA
• Power consumption
• ≤ 200 mA
• Allowable load
• Type of output • NPN or PNP, normally open or nor-
mally closed
Version with double
inductive 4-wire switch
• Power supply • 10-30 V DC
• Power consumption • ≤ 15 mA
• ≤ 150 mA, per output
• Allowable load
• Type of output • PNP, normally open
Type 1062
Version with double
inductive 2-wire
NAMUR switch
• Power supply • 8 V DC
• ≤ 1,2 mA (activated) and
• Power consumption
> 2,1 mA (not activated)
• Allowable load • see table in chap. „8.2.5"
• Type of output • acc. to NAMUR
inductive load
supply voltage
[i
24 V DC
30 V DC
50 V DC
74 V DC
125 V DC
250 V DC
125 V AC
250 V AC
Table 1: Allowable loads for a mechanical contact version
english
Resistive load
] [i ]
max max
5 A 5 A
2 A 5 A
0,7 A 1 A
0,25 A 0,6 A
0,03 A 0,4 A
0,02 A 0,25 A
8 A 8 A
8 A 8 A
15