Presentation Of The Programs; Turbo Mode; Normal Mode - Tecno-gaz B-MAX Manuel De L'utilisateur

TYPES OF ACOUSTIC SIGNAL
The lamp has 3 acoustic signals:
a‐ Long beep: when the lamp is switched on or off, or when the battery is connected
b‐ 2 short beeps: when the treatment is started
c‐ 1 short beep: when the cycle parameters are selected, every 10 seconds of use
(every 5 seconds for the
turbo program).
The B Max lamp has 6 programs that can be selected and activated according to the
operator's requirements.
TURBO MODE
This program can be selected only through the relevant button (1).
The program must be used when you need immediate maximum power.
The emitted power is about
1600mW/cm2
The time selection can be 5‐10‐20
seconds
NORMAL MODE
This program can be selected using the program selection button (3).
The program emits a power of about
650mW/cm2
The time selection can be 10‐20‐30
seconds
PRESENTATION OF THE PROGRAMS
15
ENGLISH
Fig. 12
Fig. 13