Power Failure; Information On The App "Sous Vide; Information On How To Use The App; System Requirement For Use Of The App - Proficook PC-SV 1159 Mode D'emploi

– Fish: Temperature 55 °C - 58 °C
Thickness
10 mm
20 mm
30 mm
40 mm
50 mm
60 mm
– Vegetables: Temperature 80 °C - 85 °C
Type
Potatoes
Asparagus
Root vegetables
Crisp vegetables

Power Failure

If the power supply is interrupted, the process must be
restarted.

Information on the App "Sous Vide"

The Sous Vide app is available for android and iOS. Scan
the corresponding QR code to get directly to the download.
NOTE:
Depending on the provider, there may be costs involved in
downloading the app.
Google Play

Information on How to Use the App

This appliance allows you to operate the appliance via your
home network. A prerequisite is a permanent Wi-Fi connec-
tion to your router and the free app "Sous Vide".
We recommend disconnecting the appliance from the
power supply when you are away from home to prevent
unintentional switching on while you are on the road!

System Requirement for Use of the App

• iOs 8.0 or higher
• Android 4.1 or higher

Commissioning via the App

1. Install the "Sous Vide" app. Create a user account.
2. Activate the Wi-Fi function in the settings of your
appliance.
PC-SV1159IM
3. Place the appliance at a distance of about 5 meters to
Time in Minutes
4. Press and hold the
10
20
5. Launch the app and select " + ".
30
6. Follow the instructions on the display.
40
7. Once the appliance has been successfully connected,
50
60

Restore Wireless Connection

The appliance must first be reconnected to the app each
Time in Minutes
time when it has been disconnected from the power supply.
40
1. Open the app.
25 2. Press and hold the
70
70
3. The appliance now restores the connection to the app.
1. Attach the appliance onto a suitable pan.
2. Place the packaged food into the pan.
3. Pour warm water into the pan to reduce the heating
4. Press the
5. Use the
6. Confirm your setting by pressing the
7. Use the
8. Confirm your setting by pressing the
9. Use the
10. Confirm your setting by pressing the
App Store
11. Use the
12. Press the
13. When the set temperature is reached, you will hear
14. You hear a beep at the end of the time. The notification

Complete Operation Prematurely

1. You can also previously cancel the operation at any
2. Disconnect the mains plug from the socket.
your router.
button for about 3 seconds while
the appliance is switched off. You hear beeps while the
indicator lamp will first flash slowly and then quickly.
the indicator lamp lights up . Now you can operate the
appliance using the app.
button for about 3 seconds while
the appliance is switched off. You hear beeps while the
indicator lamp will first flash slowly and then quickly.
This may take a few minutes.

Use

time.
button to switch on the appliance. You will
hear a beep and " " appears in the display.
/ buttons to select between the tem-
perature units °C (degrees Celsius) and °F (degrees
Fahrenheit).
/ buttons to set the desired temperature.
display starts flashing.
/ buttons to set the hours.
ute display and the button control lamp start flashing.
/ buttons to set the minutes.
button. The current water temperature is
displayed. The appliance starts to heat the water. The
power indicator lights blue.
two beeps. The power indicator starts flashing. The
countdown timer starts up. The temperature and the
remaining time will be shown alternately in the display.
" " appears in the display. The appliance will switch
off automatically. Disconnect the plug from the mains.
time. Hold the button pressed down for about 3 sec-
onds.
button.
button. The hour
button. The min-
49
04.12.18