Fitting The Floor-Tool - Numatic TTV-5565 Mode D'emploi

!

Fitting the floor-tool

Lower the floor-tool arm by moving the release lever to the lower position (fig.9).
Push floor-tool onto the holder and secure with the easy-fit securing pin (fig.10).
Push waste collection pipe onto the floor-tool; ensure a tight fit (fig.11).
Note: Raise floor-tool again before driving to the cleaning area (fig.12).
Owning the TTV-5565 scrubber drier is like having 2 machines in one.
With two width-settings the operator can quickly adapt the machine to any cleaning situation;
without the need for any tools. The machine can be set to clean anything from a narrow corridor to
a large warehouse. The TTV-5565 is a totally versatile machine. (see Fig.13).
10
ALWAYS ENSURE THAT THE MACHINE IS SWITCHED OFF
BEFORE MAKING ANY ADJUSTMENTS
Fig.9
244033 05/14 (A11)
Fig10
650mm
Fig.13
!
Fig.11
Fig.12
550mm
!
1
2