Table des Matières
Publicité
!
The TTV-5565 is equipped with a free-wheel function that will enable the operator to move the machine manually if
required.
Note:
None of the other functions on the machine will work whilst in the Free Wheel
Remember to re-engage the drive when you reach your final destination / before using the
34
ALWAYS ENSURE THAT THE MACHINE IS ON LEVEL
GROUND BEFORE DISENGAGING BRAKE ARM.
NEVER DISENGAGE THE BRAKE WHEN THE MACHINE
IS ON A SLOPE / GRADIENT.
Fig.63
Fig.64
Fig.65
WHEN THE BRAKE IS DISENGAGED THE MACHINE IS IN FREE-WHEEL MODE
The motor brake is located on the left side of the machine near the rear
wheel (see fig.63).
Pull the arm out (see fig.64).
Swing to the disengaged position (see fig.65).
The motor brake will be fully disengaged.
The machine will now be in full free-wheel mode.
WARNING!
AND HAS NO BRAKE FACILITY.
244033 05/14 (A11)
!
Mode!.
machine.
Publicité
Table des Matières
