Detach The Vs From The Din Rail - Aventics CD01-PI Notice D'instruction

Fig. 11: Disassembling the CD01/02-PI from a surface
50 Mounting screws
AVENTICS | CD01-PI | R412012449–BAL–001–AD
50
8.2

Detach the VS from the DIN rail

1. Make sure the system is not under pressure or voltage
before disassembly.
2. Remove all pneumatic and electrical connections.
3. Secure the device against falling down before detaching
it from the DIN rail.
53
Fig. 12: Disassembly of the CD01-PI from a DIN rail
50
52
54
51
83
Disassembly