You Must Heed These For The Vs Cd01-Pi - Aventics CD01-PI Notice D'instruction

58 AVENTICS | CD01-PI | R412012449–BAL–001–AD
For your safety
General instructions
2.4

You must heed these for the VS CD01-PI

Observe the regulations for accident prevention and
environmental protection in the country where the product
is used and at the workplace.
The AVENTICS warranty only applies to the delivered
configuration and extensions taken into account in the
configuration. The warranty no longer applies after a
conversion that exceeds these extensions. The warranty will
not apply if the product is incorrectly assembled.
Only use the device within the performance range provided
in the technical data.
Do not place any mechanical loads on the device under any
circumstances. Never use the device as a handle or step.
Do not place loose objects on it.
Never detach VS lines or components that may be
pressurized.
Always observe the tightening torques specified in these
instructions, as otherwise the thread holes may be
damaged.
Always connect the CD01-PI grounding connection (1) to the
respective grounding system on your installation.
Please ensure that the power supply unit is suitably
dimensioned (see chapter 6.5.1 "Calculating VS power
consumption" on page 74).
For VS CD01-PI with 24 V DC coils:
Supply the valve system with 24 V DC voltage. Only use
power packs with secure isolation to EN 61558, so that the
power circuit is deemed a SELV/PELV power circuit in
compliance with IEC 60364-4-41.