Aventics CD01-PI Notice D'instruction page 65

26
27
Fig. 4: Double and single base plate
26 Working connection (2)
27 Working connection (4)
AVENTICS | CD01-PI | R412012449–BAL–001–AD
Double base plates 26 mm for double solenoid valves
You can install one or two valves per base plate. If you only
install one valve, you need to seal the open valve position
with a blanking plate or install another component.
If you use a base plate for single solenoid values, you can
only use it to control single solenoid valves.
The cascade plug-in system connects the base plates
electrically and transmits the valve control signal from the left
end plate to the valve.
28
28 Electrical valve connection
29 Cascade plug-in system
65
Device Description
29