Medela Thopaz+ Mode D'emploi page 40

10.2
Change settings
WARNINGS
The settings may only be changed by the physician or on medical orders.
CAUTIONS
Adapt pressure settings for pediatric patients.
10.3
Save a changed
parameter as the
new standard
40 |
Changing settings
Important: Thopaz + is on Standby.
1.
2.
1. Change all desired parameters as mentioned above.
2.
Choose "Save as standard" and press "OK" [
will appear for approx. 3 seconds.
3. The parameters are saved as the new standard. Whenever
you switch Thopaz + on and choose a new patient, Thopaz +
will be set with these settings.
4.
Press "Home" [
1.1 Press "Menu" [
2.1 Choose the desired
parameter by pressing
[ ].
2.2 Confirm with "OK" [
change the desired
parameter.
2.3 Change the desired
parameter by pressing
[ ] or [
with "OK" [
2.4 Press "Home" [
leave the settings.
2.5 The settings are changed
for the current therapy.
] to leave the settings.
].
] to
] and confirm
].
] to
]. "Saved"