Medela Thopaz+ Mode D'emploi page 30

7.6.2
Reset fluid display
30 |
Preparation for use/operating instructions
For an individual fluid management an additional fluid
parameter can be set to zero at any given time.
1.
2.
1.1 Press [ ] for longer than
3 seconds.
2.1 The timer on the left side is
giving you the time when
the parameter was set to
zero (in this case 12 minutes
ago). The fluid amount on
the right side is giving you
the drained fluid volume (in
this case 50 ml got drained
in the last 12 minutes). To
reset the timer and fluid
again press [ ] for longer
than 3 seconds.