Description Of Controls; Switching The Appliance On And Off - Angelo Po FX 61 E3 Manuel D'utilisation Et D'installation

DESCRIPTION OF CONTROLS

The illustration shows the appliance's control panels, while the list details
the descriptions and functions of the individual controls.
A – Digital display: displays the working parameters and alarm codes.
B – Function enabling button. enables the function shown on the dis-
play.
C – Back button: cancels the current operation and returns to the previ-
ous page.
D – Reset button: resets the alarms (beepers and lights).
E – "START-STOP" button: Starts or ends the selected program cycle,
shown on the display (cooking cycle, washing cycle, etc.).
F – Knob: Used to select the function required or modify values.
To select one of the zones required (function or value) turn the knob clock-
wise or anticlockwise.
- Clockwise: scrolls "downwards" through zones or increases the value
shown.
- Anticlockwise: scrolls "upwards" through zones or decreases the val-
ue shown.
After selecting the function required or the value, press the knob to con-
firm and save the function or value.
G – On/off button: turns the appliance's electricity supply on and off.
H – USB port: used to connect a remote data storage unit to the appli-
ance.

SWITCHING THE APPLIANCE ON AND OFF

Proceed as follows.
Lighting
1 – Operate the appliance's master switch to connect it to the electrical
IT
mains.
2 – Turn on the water supply tap.
GB
3 – Press button (G) to switch on the appliance.
4 – The display (A) comes on, and after a few seconds it shows the page
DE
giving access to the appliance's main functions.
FR
Turning off
ES
Important
Always switch off the appliance after use.
5 – Press button (G) to switch off the appliance.
6 – Turn off the water supply tap.
7 – Cut off the mains electricity supply using the appliance's master
switch.
English - 8 -
A
B
C
D E
F
H G
IDM-39617700300.tif
A
G
IDM-39617700300-A.tif
Use and installation manual