Aventics RTC-BV Notice D'instruction page 29

AVENTICS | RTC/CKP | R402003540–BAL–001–AG | English
5. 1.
6. 2.
Sequence when tightening the screws
2. Unscrew the screws by max. a quarter of a turn. Use a
mallet or a similar tool and slightly tap against the
slide. A slight play must still be felt.
If the wear is very heavy, replacement slide bearing guides
can be mounted. See the online product catalog for more
information.
Relubricating the ball rail guide
Both guide shuttles are lubricated individually depending
on the version either by way of lube holes or lube nipples.
O Relubricate the ball rail guide after a traveled distance
of 5000 km or at least once a year.
Version with lube holes
Recommended greases:
W
Grease of NLGI grade 00 according to DIN 51818
(GP00K-20 according to DIN 51826), e.g.
– Rexroth Dynalub 520
– Castrol Longtime PD00
– Elkalub GLS 135/N00
The lubrication is carried out by way of the lube holes on
the front side (1).
1
Version with lube holes
Version with lube nipples
3. 7.
Recommended greases:
W
The lubrication is carried out by way of the lube lube
nipples (1).
4. 8.
Version with lube nipples
Grease of NLGI grade 2 according to DIN 51818
(KP2K-20 according to DIN 51825), e.g.
– Rexroth Dynalub 510
– Castrol Longtime PD2
– Elkalub GLS 135/N2
1
28