Battery Compartment - Medela Swing Mode D'emploi

2. Assembly (cont.)
Note
• Remove the batteries if they
are not going to be used for an
extended period of time.
• If breast pump does not turn on,
make sure the batteries have
been inserted properly. If this
does not solve the problem refer
to the troubleshooting section
of this instruction booklet or
contact Medela Customer
Service at 1-800-435-8316.
• Each set of batteries will provide
approximately 2 hours of
pumping time.
• Do not mix old and new
batteries.
• Do not mix alkaline, standard
(carbon-zinc) or rechargeable
batteries.
20
2.3 Powering Options (cont.)

2.3.2 Battery Compartment

1
Use 4 AA batteries.
4
Replace battery cover.
2
Replace all batteries at the
same time.
Remove battery cover by
pushing the button toward
the clip.
Note
• While travelling internationally, we recommend purchasing a Universal
Power Plug Adapter (not included). Please consult with the country you are
visiting to find out what type of adaptor will work best.
For information about traveling with your breast pump and expressed
breast milk, visit www.TSA.gov.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
3
Place the NEGATIVE (-) end of
the battery against the front of
the spring by pushing the battery
in and down in one motion until
the battery snaps into place. The
POSITIVE (+) end of the battery
should be near the positive sign
on the battery pack.
21