Electrical Operation; Battery Operation - Medela Swing Mode D'emploi

Masquer les pouces Voir aussi pour Swing:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Electrical operation

1

Battery operation

2
3
Pumping
VI
Be comfortably seated and relax. Use a footrest, when pumping or when feeding your baby.
Elevating your feet puts you into proper sitting position to avoid stress on the lower back and
perineum.
1
2
+
a
To install the batteries, push the bar towards the clip to open the
cover of the battery compartment.
Insert the batteries in the correct position as indicated inside the
battery compartment and snap the cover back into place
(AA Mignon LR6).
The batteries do not need to be removed if the mains adapter is used
for pumping
+
-
Center your breastshield over your nipple.
• Do not tilt or overfill bottles when pumping.
• Take care not to kink tubing while pumping.
Switch on the breastpump by pressing the On/Off button.
The pump will begin pumping in the
Insert the metal plug on the end of the
mains adapter cord into the hole on the
side of the motor unit. Plug the electrical
connector on the end of mains adapter
cord into power jack (4.8 V DC).
n
Stimulation
Phase.
EN
5

Publicité

Table des Matières
loading

Table des Matières