Getting Started; Cleaning Before First Use; Charging The Battery - Medela Swing Maxi Mode D'emploi

4. Getting started

4.1 Cleaning before first use

It is important to do the following before using the breast pump for the first time:
1. Remove the protective cover from the breast shields.
2. Disassemble and clean all parts (except for the tubing) according to the cleaning instruc-
tions – see sections 5.2, 5.3 and 5.4.

4.2 Charging the battery

Charge the battery for two hours.
swing maxi
i
Information
• You can use your breast pump while charging the battery. However, it will charge in a slower
mode when the pump is running.
101043399-2021-04-A-swing-maxi-MedelaFamily-MD-ifu-ENUS-FRCA-ESMX.indb 11 101043399-2021-04-A-swing-maxi-MedelaFamily-MD-ifu-ENUS-FRCA-ESMX.indb 11
1. Connect the power cable to the pump unit.
2. Plug the power cable into the power adaptor.
3. Plug the power adaptor into a wall outlet.
Æ During charging, the status light is pulsing in green color.
Æ When charging is complete, it lights up steadily in green
color.
For status light functions in operating mode see section 7.2.
11
05/07/2021 12:15:20 05/07/2021 12:15:20