2. Intended purpose
The Solo breast pump is a powered breast pump to be used by lactating women to express
and collect milk from their breasts. The Solo breast pump is intended for a single user.
3. Product description
3.1 Description of the device
The Solo is a personal-use electric breast pump that includes 2-Phase Expression technology
and is designed for single pumping. It consists of a pump unit, a pump set (breast shield,
connector and bottle) and a tubing.
The operating life of the Solo breast pump is 250 hours.
3.2 The device includes
Refer to figure ¢4 on the foldout pages.
¢4-01 (Disposable) protective cover
¢4-02 PersonalFit Flex breast shield M 24 mm
¢4-03 PersonalFit Flex connector
¢4-03-1 Connector body
¢4-03-2 Membrane
¢4-04 Bottle
¢4-05 Lid
¢4-06 Bottle stand
4. Getting started
4.1 Cleaning before first use
It is important to do the following before using the breast pump for the first time:
1. Remove the protective cover ( ¢4-01) from the breast shields ( ¢4-02).
2. Disassemble and clean all parts (except for the tubing) according to the cleaning
instructions – see section 5.1.
4.2 Charging the battery
Charge the battery for two hours.
1. Use the power cable to connect the pump unit with the power adapter.
2. Plug the power adapter into a wall outlet.
Æ During charging, the status light is pulsing in green colour.
Æ When charging is complete, it lights up steadily in green colour.
i
Information
• You can use the breast pump while charging the battery. However, it will charge in a slower
mode when the pump is running.
¢4-07 Tubing
¢ 4 -07-1 Round end piece of tubing
(couples with the connector)
¢ 4 -07-2 End piece with polygonal
shape
(couples with the pump unit)
¢4-08 Power adapter with cable
¢4-09 Pump unit
7