50
AVENTICS | ED05 | R414002533–BAL–001–AG
For your safety
2
For your safety
The ED05 pressure regulator has been manufactured according
to the accepted rules of safety and current technology. There is,
however, still a danger of personal injury or damage to
equipment if the following general safety instructions and the
warnings before the steps contained in these instructions are
not complied with.
Read these instructions completely before working with the
ED05 pressure regulator.
Keep these instructions in a location where they are
accessible to all users at all times.
Always include the operating instructions when you pass
the ED05 pressure regulator on to third parties.
2.1
Intended use
The ED05 pressure regulator is a pneumatic device with
integrated electronics that is only designed to regulate
pneumatic pressures.
Air that is dry and free of condensate is the permissible media.
Operation with pure oxygen is not permitted.
The ED05 pressure regulator is for industrial applications
only.
An individual license must be obtained from the authorities
or an inspection center if the ED05 pressure regulator is to
be used in a residential area (residential, business, and
commercial areas). In Germany, these individual licenses
are issued by the Regulating Agency for
Telecommunications.
Observe the performance limits listed in the technical data.
Only use the ED05 pressure regulator inside.
Intended use includes having read and understood these
instructions, especially the chapter "2 For your safety".