Assembling The Ed05 Pressure Regulator On A Mounting Plate Or In A Control Cabinet - Aventics ED05 Notice D'instruction

62 AVENTICS | ED05 | R414002533–BAL–001–AG
Assembling the ED05 pressure regulator
Before installation, ensure that the housing ventilation port
(6) is open and not e.g. painted shut.
6
00126343
6.2 Assembling the ED05 pressure regulator on
a mounting plate or in a control cabinet
14
Abb. 4: Assembling the ED05 pressure regulator on a mounting plate
or in a control cabinet
14 Screws (not included in the delivery contents)
3 Outlet connection 2; G1/4"; MD = max. 10 Nm
4 Inlet connection 1; G1/4"; MD = max. 10 Nm
5 Exhaust air connection 3; G1/4"; MD = max. 10 Nm
3
4
5
00122944