Wheel Installation - Yamaha Rhino Fuel Injection 700 FI YXR70FY Manuel Du Propriétaire

Wheel installation

1. Install the wheel and the nuts.
G
The arrow mark
ward the rotating direction of the wheel.
G
Tapered nuts are used for both the front and
rear wheels. Install the nuts with their tapered
side towards the wheel.
2. Lower the vehicle so that the wheel is on the
ground.
3. Tighten the wheel nuts to the specified
torque.
WARNING
Do not reverse the rims on the Rhino to widen
the track width. Installing wheels improperly
increases the risk of wheel failure and acci-
dents.
8-115
EVU00940
on the tire must point to-