Yamaha Rhino Fuel Injection 700 FI YXR70FY Manuel Du Propriétaire page 420

2
1. Positive battery lead (red)
2. Negative battery lead (black)
1. Câble positif de batterie (rouge)
2. Câble négatif de batterie (noir)
1. Cable positivo de la batería (rojo)
2. Cable negativo de la batería (negro)
To install the battery
TIP
Be sure the battery is fully charged.
1. Place the battery in its compartment.
1
2. Connect the positive battery lead first, then
the negative battery lead by installing their
bolt.
3. Hook the battery band.
4. Reinstall the battery compartment cover by
installing the quick fastener screws.
5. Close the hood.
NOTICE
G
Always keep the battery charged. Storing a
discharged battery can cause permanent
battery damage.
G To charge a VRLA (Valve Regulated Lead
Acid) battery, a special (constant-voltage)
battery charger is required. Using a con-
ventional battery charger will damage the
battery. If you do not have access to a con-
stant-voltage battery charger, have a
Yamaha dealer charge your battery.
8-127