Electromagnetic Compatibility - arjo Enterprise 9600X Notice D'utilisation

10. Electromagnetic Compatibility

Product has been tested for compliance with current regulatory
standards regarding its capacity to block EMI (electromagnetic
interference) from external sources.
Some procedures can help reduce electromagnetic interferences:
•
•
WARNING
Wireless communications equipment such as wireless computer network
devices, mobile phones, cordless telephones and their base stations, walkie-
talkies, etc. can affect this equipment and should be kept at least 1.5 m away
from the equipment.
Intended Environment: Professional Healthcare Facility Environment
Exceptions: HF Surgical Equipment and the RF Shielded room of
an ME SYSTEM for magnetic resonance imaging.
WARNING
Use of this equipment adjacent to or stacked with other equipment should be
avoided because it could result in improper operation. If such use is
necessary, this equipment and the other equipment should be observed to
verify that they are operating normally.
Guidance and manufacturer's declaration – electromagnetic emission
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Use only Arjo cables and spare parts to avoid increased
emissions or decreased immunity which can compromise the
correct functioning of the equipment.
Ensure that other devices in patient-monitoring and/or life-
support areas comply to accepted emissions standards.
Compliance Guidance
Group 1
This equipment uses RF energy only for its internal
functions. Therefore its RF emissions are very low
and are not likely to cause any interference in nearby
Class A
electronic equipment.
This equipment is suitable for use in all establishments
other than domestic and those directly connected to the
Class A
public low-voltage power supply network that supplies
buildings used for domestic purposes.
Complies
73