Nurse Call Connection; Rs232 Connection (Optional) - arjo Enterprise 9600X Notice D'utilisation

Nurse call connection

Connect one end of the nurse call cable to the 37-pin D-type
socket, located below the head end of the bed on the patient's
right hand side (1).
Connect the other end of the nurse call cable to a compatible
nurse call system. The type of connector will vary depending
on the nurse call system.

RS232 connection (Optional)

Connect one end of an RS232 cable to the 9-pin D-type
socket, located below the head end of the bed on the patient's
right hand side (2).
Connect the other end of the RS232 cable to a device capable
of receiving data through an RS232 connection.
WARNING
Data retrieved from the RS232 connection is not intended to be used
to make clinical decisions. All patient diagnosis, treatment and care
should be performed under the supervision of an appropriate
healthcare professional.
Fig. 5 - Nurse call and RS232 connections
1
2
15