arjo Enterprise 9600X Notice D'utilisation page 36

The underbed light illuminates the floor on either side of the
Underbed light
bed.
Press this button to turn the underbed lights on or off. The
indicator above the button will light when the underbed lights
are on.
Press the Nurse Call button to request assistance. The
Nurse call
indicator above the button will light to confirm operation.
At the nurse's station, the call location will be displayed and/or
an audible alert will sound, depending on the type of nurse call
system.
Procedures to reset nurse call vary from one system to
another. Refer to the manufacturer's instructions for use.
After the call is acknowledged, the indicator below the Nurse
Call button will light to reassure the patient that their request
has been received.
Microphones and loudspeakers in the head end side rails allow
Models 9700X
and 9800X only
personnel at the nurse's station to speak with the patient
WARNING
The nurse call function should be checked periodically for correct
operation; as a minimum, Arjo recommends that this should be done
before each new patient uses the bed and whenever the nurse call
cable has been disconnected. Failure to carry out this check may
result in alarms not being indicated at the nurse's station.
36