Weighing System - arjo Enterprise 9600X Notice D'utilisation

Weighing
Position the bed on a flat, level surface and apply the brakes
system (see page 19).
Remove the four transport locking bolts (1) and washers (2);
there are two locking bolts at the head end of the bed and two
at the foot end.
Retain the bolts and washers in case the bed needs to be
transported at a later date.
Caution
To prevent damage to the weighing mechanism, replace the transport
locking bolts and washers before transporting the bed. This is not
necessary when moving the bed short distances over smooth
surfaces.
When replacing the transport locking bolts care must be take to avoid
trapping or damaging any cables.
2
1
Fig. 3 - Removing the transport bolts
2
1
13