arjo Enterprise 9600X Notice D'utilisation page 26

3
4
Fig. 13 - Positioning the X-ray cassette
Pull the knob and slide the tray underneath the backrest.
The red moulding on the top of the X-Ray sitting tool indicates
the top right hand corner of the X-Ray cassette. Use this
feature to assist in accurate positioning.
Fig. 14 - X-Ray Sitting Tool
Release the knob to hold the tray in one of the latching
positions.
After use, pull the tray out to the fully open position and remove
the X-ray cassette. Return the tray to the closed position below
the backrest and replace the head board.
26