SafeSet™
WARNING
SafeSet visual status indicators are only for use with patients at risk
of falls and should not be used with patients that are at risk of
climbing over the side rails.
SafeSet visual status indicators provide a quick visual
indication of optimum bed settings for patients identified as
being at risk of falls.
SafeSet visual status indicators show four safety-critical bed
parameters:
Two identical SafeSet indicator panels are located just below
the foot board.
Indicator lights (1) above each symbol light red to show a
potentially unsafe condition, or green to indicate a safe
condition.
Indicator light green
Symbol
Brakes on
All side rails raised*
Mattress platform at
minimum height (or within
25mm of minimum height)
VariZone patient movement
detection set
* To comply with FDA guidelines, the system will still show a "safe" condition if one (but not both) of the
foot end side rails are down.
• Brake setting
• Side rail position
• Mattress platform height
• Movement detection status.
2
Fig. 31 - SafeSet indicator panel
("safe" condition)
1
Indicator light red
("unsafe" condition)
Brakes off
If either of the head end panels are
lowered.
If both foot end panels are lowered.
Mattress platform not at minimum height
VariZone patient movement detection not
set
51