Electromagnetic Compatibility - arjo Enterprise 9000X Notice D'utilisation

10. Electromagnetic Compatibility

Product has been tested for compliance with current regulatory standards
regarding its capacity to block EMI (electromagnetic interference) from
external sources.
Some procedures can help reduce electromagnetic interferences:
•
•
WARNING
Wireless communications equipment such as wireless computer network devices,
mobile phones, cordless telephones and their base stations, walkie-talkies, etc. can
affect this equipment and should be kept at least 1.5 m away from the equipment.
Intended Environment: Professional Healthcare Facility Environment
Exceptions: HF Surgical Equipment and the RF Shielded room of an ME
SYSTEM for magnetic resonance imaging.
WARNING
Use of this equipment adjacent to or stacked with other equipment should be
avoided because it could result in improper operation. If such use is necessary, this
equipment and the other equipment should be observed to verify that they are
operating normally.
Guidance and manufacturer's declaration – electromagnetic emission
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
62
Use only Arjo cables and spare parts to avoid increased emissions or
decreased immunity which can compromise the correct functioning of
the equipment.
Ensure that other devices in patient-monitoring and/or life-support areas
comply to accepted emissions standards.
Compliance Guidance
Group 1
This equipment uses RF energy only for its internal functions.
Therefore its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
Class A
This equipment is suitable for use in all establishments other than
domestic and those directly connected to the public low-voltage
Class A
power supply network that supplies buildings used for domestic
purposes.
Complies